Sywon Brass Misting Nozzles Replacement Heads 20 Pack Garden Patio Lawn Landscaping Dust Control Outdoor Cooling Mister System, 10/24 UNC
Extreame Savings Item! Save 48% on the Sywon Brass Misting Nozzles Replacement Heads 20 Pack Garden Patio Lawn Landscaping Dust Control Outdoor Cooling Mister System, 10/24 UNC by Sywon at List It Fort Lauderdale. MPN: SY07-BMNRH-20. Hurry! Limited time offer. Offer valid only while supplies last. DURABLE MATERIAL & 0.012'' DIA. ORIFICE This Sywon misting nozzles are made of brass with good quality; Rust-free and durable. The orifice of these misting nozzles is 0.012 inch/0.3 mm in diameter, which fits for low pressure mister system. EASY TO INSTALL & HIGH EFFICIENCY They can be easily screw into any 10/ 24 UNC threaded mist nozzle opening. There is a stainless steel mesh in the nozzle with good filter efficiency. Operation pressure is 20-70kg/Cm. Flow rate is 80-145ml/Min. WIDE USAGE
Product Description & Reviews
DURABLE MATERIAL & 0.012" DIA. ORIFICE This Sywon misting nozzles are made of brass with good quality; Rust-free and durable. The orifice of these misting nozzles is 0.012 inch/0.3 mm in diameter, which fits for low pressure mister system. EASY TO INSTALL & HIGH EFFICIENCY They can be easily screw into any 10/ 24 UNC threaded mist nozzle opening. There is a stainless steel mesh in the nozzle with good filter efficiency. Operation pressure is 20-70kg/Cm. Flow rate is 80-145ml/Min. WIDE USAGE The mist nozzles can be widely applied for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, etc. PACKAGE: 20 x Brass Misting Nozzles WARNING 1) This misting nozzle does not have a filtering device. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging. 2) Please place them out of children's reach to avoid choking.
Features & Highlights
- DURABLE MATERIAL: Made of brass with good quality; Rust-free and durable
- HIGH EFFICIENCY: Operation Pressure:20-70kg/Cm. Flow Rate:80-145ml/Min
- WIDE USAGE: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, etc.
- 0.012" DIA. ORIFICE: The orifice of these misting nozzles is 0.012 inch/0.3 mm in diameter, which fits for LOW PRESSURE MISTER system
- EASY TO INSTALL: Easily screw into any 10/ 24 UNC threaded mist nozzle opening
|Package Weight:||0.26 pounds|
|Package Size:||2.2 x 0.31 x 0.31 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Sywon, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 4332695630, ean: 0840620103428,
1/4'' Tan Misting LineThis 50' roll of 1/4'' Tan Vinyl Tubing (.245 OD x .156 ID) is used with Dig's 1/4'' misting components. Compatible with Dig's Ocean Breeze Misting Kits.Same Day Shipping (M-F to 5PM EST). Lifetime Warranty on Products. 100% Satisfaction Guarantee. 30 Day No Question Asked Returns. Excellent Customer Service.
Button Series 10/24 Thread mist Nozzles are the most widely used mist nozzles for misting systems. Misting nozzles are made with brass body and stainless steel orifice. Available in various different orifices to create desired fine mist. Sold In a Package of 10 NozzlesMicro Size no tools required. Orbits replacment nozzles. long lasting Sold In a Package of 10 Nozzles. Nickle Plated Long lasting. Low and High Pressure Usage.
● 12V 60W 5L/min with 12V 6A 60W AC to DC Adapter Power Supply ;Temperature:0-60 degree celsius; Multi-purpose:Home use for garden sprinklers,shower,water taps; Size:16.5*10*6cm ; Flow rate :5L/min;Working pressure:0.8Mpa; Power:60w; corrosion resistant ; 12vDC ; Tube: 1/2'' ●6M(20feet)Misting System:Easy installation in minutes; Affixed with saddle clamps or cable ties;No power required, work with the pressure of facuet; 6m (20feet) misting line is available for the system;All quick
mpn: 10121W, ean: 0852687589411,
This Orbit Slip-Lok misting tee coupling has a durable brass mist nozzle and works with both low and high pressure misting systems. The Slip-Lok fitting works with 3/8-inch nylon mist tubing and assembles in just minutes for quick installation and repair. This water misting system fitting can rotate a full 360 degrees so you can direct your water mist right where it is needed. This misting tee is an ideal mist part for customizing or making repairs to your residential misting system or Arizona
Turn on the water tap to wash the system for 1 minute to purge the system and remove any impuritiesScrew the misting nozzles to the Tee fittings, except the last one on the end plugTurn on the water tap to wash the system for 2 minutes to insure that the system is fully purgedTurn the water off and install the last nozzle into the fitting with the end plugFix the misting line by the cable ties saddle clamps providedTurn on the tap slightly until jets are working, enjoy the cooling misting
mpn: WN22603, ean: 0740016287094,
Turn your fan into an outdoor cooling misting fan. The Ring Pictured in action is a 12'' 3 nozzle misting ring. We currently have 4 fan misting rings to choose from. These rings are made of 1/4'' tubing. Each ring comes with 20' of leader tubing with water spigot adapter, and fan mounting clips. Every one of our misting rings is hand assembled and inspected by us to ensure quality. We use top quality components to ensure the longevity of your misting ring. Our LLDPE tubing is 236 psi NSF rated
mpn: 10106H, ean: 0852687303031,
Misting systems that are effective need brass and stainless steel mist nozzles that are the most efficient and conserve water. These Orbit mist nozzles only use one half gallon per hour per nozzle and features a sturdy brass body with stainless steel orifice. The nozzle requires simple maintenance; just soak occasionally in misting nozzle cleaner to remove mineral deposits that may accumulate with use. Features and Benefits: 012mm orifice size for fine mist, Great for patio misting and other
Package including Misting Nozzle Tees 10pcs,Nozzle 10pcs and Plug 1pcs;Brass / SS 0.012 inches (0.3mm) orifice, 10/24 threads Misting Nozzles,can be connected to 1/4'' hose. Features Item Weight:80g(2.82oz) Item Size:1.6*4 cm(1.57''*0.63'') Packing size:14*8*3cm (5.51''*3.15''*1.18''） Color:Black/Gold Max. Working Pressure:450 PSI Material:high quality polypropylene&brass Money back guarantee If at any time you're not satisfied with our product for any reason, we will replace or refund for
mpn: 10109W, ean: 0723061220346,
The calcium inhibitor filter protects your misting systems by preventing potentially clogging solid sediments from passing through the system. It filters our particles as small as 5 microns, which is smaller than a human hair. Additionally, the filter coats smaller particulates with polyphosphates that enable easier passage through nozzles without forming blockages. Annual filter replacement is recommended and will prolong the life of mist nozzles.Keeps mist cooling system operating at its
Feature: Connect with 1/2'' / 3/4'' male thread water faucet Flow rate: 6.7-7L/Hour Spray dia: about 0.8 meters 1 x Faucet joint 2 x The detachable nose quick connector 1 x 10m/33ft long PE Hose 10 x metal mister nozzle (tee) 1 x One nozzle 10 x Nylon cable ties The misting cooling system are great for agriculture, lawn, garden, patio, greenhouse ,swimming poolmisting fog cooling/irrigation, watering, greenhouse, humidification, balcony cooling,irrigation (watering flowers, grass, vegetables)*